Renkus-Heinz Iconyx IC8-R User Manual page 47

WARNING: THIS APPARATUS MUST BE SECURELY ATTACHED TO THE WALL IN ACCORDANCE WITH INSTALLA-
TION INSTRUCTIONS. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY RESULT IN INJURY.
loudspeaker and 1 inch of clearance from the other cabinet surfaces.
Installation should only be performed by skilled personnel
These loudspeakers are intended to be securely mounted using the Renkus-Heinz, Inc. HK
Array models IC8-R, IC16-R & IC16/8-R
Array models IC24-R, IC32-R & IC32/16-R
The wall mounting kits have been evaluated for wall mounting on 1/2" drywall on 2x4 studs using wood bolts secured into a 2x4 stud plus
These loudspeakers have not been evaluated for safety requirements using other mounting kits.
HARDWARE REQUIRED:
- Array models IC8-R, IC16-R & IC16/8-R
- Array models IC24-R, IC32-R & IC32/16-R
TOOLS REQUIRED
- Drill
- 5/32" & 5/8" Drill bits
- Philips #2 screwdriver or socket driver
INSTALLATION
NOTE: Each HK series hinge consists of two parts, a male mounting plate and a female mounting plate. The female hinge plates should be
attached to the loudspeakers as shown in the drawings on page 72.. The male mounting plates attach to the wall.
Each male mounting plate is provided with 6 mounting holes. Only two wood bolts in each male mounting plate and screwed into studs and
two 1/4" toggle bolts are needed to fully satisfy mounting needs and safely secure the Renkus-Heinz IC-R loudspeakers to the wall.
IMPORTANT MOUNTING INSTRUCTIONS
Hinge Kit Model HK-IC8R &16R
Hinge Kit Model HK-IC24R &32R
IC-R
Users Manual
47