Optional Accessories - Epson EMP-735 User Manual

Optional Accessories

The following optional accessories are available for purchase if required. This
list of optional accessories is current as of December 2002. Details of
accessories are subject to change without notice.
Soft carry case ELPKS16
Use this case if you need to carry the projector by hand.
Spare lamp ELPLP18
Use as a replacement for spent lamps.
50" portable screen ELPSC06
A compact screen which can be carried easily.(Aspect ratio
60" screen ELPSC07
80" screen ELPSC08
100" screen ELPSC10
A portable roll-type screen.(Aspect ratio 4:3)
VGA-HD15 PC cable ELPKC02
(1.8 m (6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
Use to connect the projector to a computer.
VGA-HD15 PC cable ELPKC09
(3 m (9.8 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
VGA-HD15 PC cable ELPKC10
(20 m (65.6 ft.) - for mini D-Sub 15-pin/mini D-Sub 15-pin)
Use this extension cable if the accessory computer cable is too short.
VGA-HD15/BNC PC Cable ELPKC11
(1.8 m (6 ft.) - for mini D-Sub 15-pin/5BNC)
Use in order to connect the projector to a computer with a 5BNC port.
Component video cable ELPKC19
(3 m (9.8 ft.) - for mini D-Sub 15-pin/RCA × 3)
Use to connect a component video
Ceiling mount * ELPMB10
Use when installing the projector to a ceiling.
Ceiling plate * ELPFC03
Pipe 370 (370 mm (14.57 inches)/silver)* ELPFP04
Pipe 570 (570 mm (22.44 inches)/silver)* ELPFP05
Pipe 770 (770 mm (30.31 inches)/silver)* ELPFP06
Use when installing the projector to a high ceiling or a ceiling with veneer panels.
Image presentation camera ELPDC02
Use when projecting books, OHP films and slides.
Remote control unit ELPST08
This is the same remote contorol as the projector's accessory remote control.
* A special method of installation is required in order to suspend the projector
from the ceiling. Please contact the place of purchase if you would like to use
this installation method.
source.
ELPDC03
ELPDC04
94
EMP-735 User's Guide
4:3)