Using the Configuration Menu Functions
Sub-menu
Sleep Mode
Sets the energy saving operation when no signal is being
input.
• When set to "ON", projection stops automatically and
• Projection starts again when the [Power] button on the
Reset
Resets all adjustment values for the "Setting" menu
functions to their default settings.
• Press the [Enter] button to display the confirmation
• Select "Reset All" to return all menu settings–including
then after the cool-down
projector changes to sleep mode if no operations are
carried out for 30 minutes whilst the "No-Signal."
message is being displayed. (The Powerindicator lights
orange.)
projector's control panel or the remote control is
pressed.
screen, and select "Yes".
settings for the "Video" and "Audio" menus–to their
default settings. (
p.57)
51
Function
period is finished, the
EMP-735 User's Guide
Default
ON
Not
applicable