Adjusting The Screen Image; Adjusting The Image Size; Focusing The Screen Image - Epson EMP-735 User Manual

Adjusting the Screen Image

You can correct and adjust the screen image in order to obtain the best possible
picture.

Adjusting the Image Size

The size of the projected image is basically determined by the distance from the
projector to the screen. (
The following procedures explain how to adjust the screen image once the
projector itself has been set up.
Tip :
The E-Zoom function lets you enlarge parts of the image. (
Procedure
Turn the zoom ring on the projector to
adjust the image.
The image can be enlarged in this way to
1.16 times the normal size.
If you would like to enlarge the image
further, move the projector further away from
the screen. (

Focusing the Screen Image

Procedure
Turn the focus ring to adjust the image
focus.
Turn the focus ring of the projector until the
projected images are in proper focus.
Tip :
• If the surface of the lens is dirty or misted over as a result of condensation, it may not
be possible to adjust the focus correctly. If this happens, clean or de-mist the lens.
( p.67, 84)
• If the projector is positioned outside the normal projecting range of 1.0–11.7 m (3.2–
38.5 ft.), it may not be possible to obtain the correct focus. If you have trouble
obtaining the correct focus, check the projection distance.
p.12)
p.12)
Turn to "W" to
increase the size
Zoom ring
Focus ring
30
EMP-735 User's Guide
p.42)
Turn to "T" to
reduce the size