Adjusting The Tracking - Epson EMP-735 User Manual

Adjusting the Image Quality

Adjusting the Tracking

If vertical stripes appear in the projected
images, and this cannot be fixed using
automatic setup, you will need to adjust the
tracking manually using the following
procedure.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Tracking" from the "Video"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
( p.58)
2
Press the [ ] and [ ]buttons
to set the tracking value so
that the vertical stripes in the
projected images disappear.
The tracking value increases or
decreases each time a button is
pressed.
3
After making the adjustment, press the [Menu] button to exit
the configuration menu.
Tip :
The image will flash when continuous tracking adjustment is carried out, but this is
normal.
Video Position
Audio Tracking
Setting Sync .
User's Logo
Brightness
Advanced Contrast
About Sharpness
Reset All Color Mode
Input Signal
Auto Setup
Reset
[ESC]: Return [ ]: Select [
Video Position
Audio
Tracking
Setting Sync .
User's Logo Brightness
Advanced Contrast
About Sharpness
Reset All Color Mode
Input Signal
Auto Setup
Reset
[ESC]: Return [ ]: Select [
35
EMP-735 User's Guide
Adjust
0
:
: 0
- +
: 0
: -
0 +
-
: 0 +
Select [Normal ]
: :
Select
: [Computer
:
ON OFF
Execute
]: Adjust [Menu]: Exit
Adjust
1000
:
: 0
: 0 -
+
:
0 - +
: 0 -
+
Select [Normal ]
:
Select
[Computer ]
:
ON OFF
Execute
]: Adjust [Menu]: Exit
]