Manually Correcting Keystone Distortion - Epson EMP-735 User Manual

Adjusting the Screen Image

Manually Correcting Keystone Distortion

The projector is provided with an automatic keystone correction function which
detects the vertical angle of the projector and carries out keystone correction
automatically. If further correction adjustment is required after automatic
keystone correction has been carried out, use the [Keystone] buttons on the
projector's control panel to make the adjustment.
Procedure
If the bottom of the
image is elongated
Projector
Tip :
• When keystone correction is carried out, the projected image will become smaller.
• If the images become uneven in appearance after keystone correction is carried out,
decrease the sharpness setting. (
• Keystone correction can also be carried out using the configuration menu.
( p.50)
• If the value displayed in the gauge on the screen stops changing when keystone
correction is being carried out, it indicates that the limit for keystone correction has
been exceeded. Check that the projector has not been set up at an angle which exceeds
the proper limit.
image is elongated
p.45, 46)
33
EMP-735 User's Guide
If the top of the
Projector