Playing Sound From The Computer - Epson EMP-735 User Manual

Connecting to a Computer

Playing Sound from the Computer

The projector has a single built-in speaker with a maximum output of 1 W. To
output the audio of a computer with an audio output port from the built-in
speaker, connect the audio output port of the computer and the Audio-In port
(stereo mini jack) at the rear of the projector with either of the following
commercially-available audio cables.
• 3.5ø Stereo mini jack audio cable
• 2RCA (L-R)/stereo mini jack audio (zero impedance) cable
To audio output port
Use the following procedure to adjust the volume of the sound output.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Volume" from the "Audio"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
( p.58)
2
Use the [ ] and [ ] buttons to
adjust the volume.
The volume is increased or reduced
each time a button is pressed.
3
After making the adjustment,
press the [Menu] button to exit
the configuration menu.
Stereo mini jack audio cable
(commercially-available)
17
EMP-735 User's Guide
To Audio-In port
Video Volume : -
10
Audio Tone : -
0
Setting Reset
Execute
User's Logo
Advanced
About
Reset All
[ESC]: Return [ ]: Select [ ]: Adjust
Video Volume :
15
-
Audio Tone :
0 -
Setting Reset
Execute
User's Logo
Advanced
About
Reset All
[ESC]: Return [ ]: Select [ ]: Adjust
+
+
[Menu]: Exit
+
+
[Menu]: Exit