Turning Off The Projector - Epson EMP-735 User Manual

Turning Off the Projector

Follow the procedure below to turn off the power of the projector.
Procedure
1
Turn off the power for the signal sources that are connected to
the projector.
Check that the power for all connected components has been turned off.
2
Press the [Power] button on either
the projector's control panel or the
remote control.
The following confirmation message will
appear.
Power OFF?
Yes : Press
No : Press any other button
If you do not want to turn off the power, press any button except the
[Power], [Page down], or [Page up] buttons.
If you do not press any button, the message will disappear automatically
after seven seconds. (The power will not turn off at this time.)
3
Press the [Power] button once
more.
The lamp will switch off. The Power
indicator will flash orange and cool-
down will start.
The cool-down period lasts for about 45
seconds. (This varies depending on factors
such as the ambient air temperature.)
When cool-down is complete, the Power
indicator lights orange.
Tip :
The projector's control panel and remote control buttons cannot be operated whilst
the Power indicator is flashing orange. Wait until it stops flashing.
button
28
EMP-735 User's Guide
Projector Remote control
Comp/Easy MP
Stops flashing and lights orange
Power
Page down Page up
S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom