Connecting To A Video Source; Projecting Composite Video Images - Epson EMP-735 User Manual

Connecting to a Video Source

Caution :
When connecting the projector to other video sources, take the following precautions.
• Turn off the power for both the projector and the video source before connecting them.
If the power for either device is on at the time of connection, damage may result.
• Check the shapes of the cable connectors and the device ports before making the
connections. If you try to force a connector to fit a device port with a different shape or
number of terminals, a malfunction or damage to the connector or port may result.

Projecting Composite video Images

Use the accessory RCA video cable to connect the video source to the Video
port at the rear of the projector.
To video output port
(yellow)
Tip :
If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [S-Video/Video] button on the remote
control to select the Video port as the input source. (
RCA video cable
(accessory)
20
EMP-735 User's Guide
To Video port
(yellow)
p.27)