About" Menu - Epson EMP-735 User Manual

Using the Configuration Menu Functions

"About" Menu

• The "About" menu shows the setting details for the current image source.
• The "Lamp" item appears as 0H for 0–10 hours, and after that, it appears in
units of 1 hour.
Computer/RGB video/
Component video/EasyMP
(Analogue-RGB, YCbCr, YPbPr)
Video Lamp
Audio Reset Lamp Timer
Setting
Video Source
User's Logo
Input Signal
Advanced
Frequency
About
Reset All
SYNC Polarity
SYNC Mode
Resolution
Refresh Rate
[ ]: Select [ ]: Enter
Sub-menu
Lamp Displays the cumulative lamp operating time.
• When the lamp warning period is reached, the display
Reset Lamp Initialises the lamp operating time. When this command
Timer is selected, the cumulative lamp operating time is reset to
the initial default value.
Video Displays the input source which is currently being
Source projected.
Input Signal Displays the input signal settings.
(Does not appear when the input source is composite
video or S-Video)
Video Signal Shows the video signal format.
(Does not appear when the input source is computer,
component video, RGB video, or EasyMP.)
Frequency Displays the horizontal and vertical scanning
frequencies.
(Does not appear when the input source is composite
video or S-Video.)
SYNC Displays the sync polarity.
Polarity (Does not appear when the input source is composite
video or S-Video.)
: 0H
Execute
: Computer
: RGB
: H ---.--kHz
V ---.--Hz
: H ------
V ------
: ------
: 0x 0
: 0.0 Hz
[Menu]: Exit
characters appear in red.
55
Video (S-Video, Composite video)
Video Lamp
Audio Reset Lamp Timer
Setting
Video Source
User's Logo
Video Signal
Advanced
About
Reset All
[ ]: Select [ ]: Enter
Function
EMP-735 User's Guide
: 0H
Execute
: Video
: Auto( )
[Menu]: Exit
Default
0H
Not
applicable
Not
applicable
Not
applicable
Not
applicable