Epson EMP-735 User Manual page 94

Saving a User's Logo
5
Select "Yes" at the confirmation
screen, and then press the
[Enter] button.
6
Select the zoom rate in the
Zoom rate setting screen, and
then press the [Enter] button.
7
Select "Yes" at the confirmation
screen, and then press the
[Enter] button.
The image will then be saved. Once
the image has been saved, the
message "Saving the user's logo is
completed." will be displayed.
Tip :
• Saving the user's logo may take a few moments (about 15 seconds). Do not use the
projector or any other sources which are connected to the projector whilst the user's
logo is being saved, otherwise it may result in errors in projector operation.
• Once a user's logo has been saved, the logo setting cannot be returned to the factory
default.
Select this image?
[ESC]: Return [
Set the zoom rate.
Zoom rate:
[ESC]: Return [
Save image as user's logo?
If you save it, the previous user's
logo will be overwritten.
[ESC]: Return [
93
EMP-735 User's Guide
User's Logo
YES NO
]: Select [ ]: Execute [Menu]: Exit
User's Logo
100% 200% 300%
]: Select [ ]: Execute [Menu]: Exit
User's Logo
YES NO
]: Select [ ]: Execute [Menu]: Exit