Adjusting The Image Position Using Screen Position - Epson EB-PU1006W/EB User Manual

2. Press the Lens Shift button on the remote control or the Lens button on the control panel.
3. Press the arrow buttons on the remote control or the control panel to adjust the position of the
projected image as necessary.
4. When you are finished, press the Esc button on the control panel or remote control.
Note: When adjusting the image height, position the image lower than where you want it to be and then
move it up. This will help prevent the image from moving down after adjustment. The image is clearest
when the lens is at the home position. To move the lens to the home position, press and hold the Lens
Shift button on the remote control or the Lens button on the control panel for at least three seconds.
Parent topic: Using Basic Projector Features

Adjusting the Image Position Using Screen Position

You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
119
Downloaded from ManualsNet.com search engine