Adjusting The Image Position Using Screen Position - Epson PRO L1490U User Manual

1 Center of lens
2 Projected image when lens shift is set to the home position
3 Maximum range: V × 5%
Note: You cannot move the image upward when the lens is shifted horizontally all the way.
3. When you are finished, press the Esc button on the control panel or remote control.
Note: When adjusting the image height, position the image lower than where you want it to be and then
move it up. This will help prevent the image from moving down after adjustment. The image is clearest
when the lens is at the home position. To move the lens to the home position, press and hold the Lens
Shift button on the remote control or the Lens button on the control panel for at least three seconds.
Parent topic:

Adjusting the Image Position Using Screen Position

You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
Note: You cannot adjust the screen position if the Screen Type setting is set to 16:10 for a WUXGA
projector model or 4:3 for a SGA+ projector model.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select Display > Screen > Screen Position.
Using Basic Projector Features
105