Software Module Settings - HP StorageWorks 8000 - NAS Command Reference Manual

Software Module Settings

60 Command Reference
You can enable/disable the following software modules for use with the HP NAS 8000:
I Data snapshots
I Virus protection
I
Tape backup
Before use, software modules must be installed, authorized and enabled. The following
commands install, uninstall, enable and disable these software modules.
getSystemPackageAuthorized
Determines whether the specified add-on software modules is installed and unlocked on the
NAS server.
I inParam[0] = Package name
I outParam[0] = Package enable
getSystemPackageDescription
Returns the description of the specified add-on software module.
I inParam[0] = Package name
I outParam[0] = Package description
getSystemPackageEnabled
Informs whether the specified add-on software module.
I inParam[0] = Package name
I outParam[0] = Package enable
setSystemPackageEnabled
Enables or disables the specified add-on software module.
I inParam[0] = Package name
I
inParam[1] = Enable
getSystemPackageList
Lists the add-on software modules available on the NAS server.
I
[0:N] = Package names
getSystemPackageName
Returns the name of the specified add-on software module.
I inParam[0] = Package name
I outParam[0] = Package name