HP StorageWorks 8000 - NAS Command Reference Manual page 24

22 Command Reference
getStorageDasdScsiVa7xxxCapacities
Returns the capacity and other configurations of the specified storage array.
I
inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = Units (B,MB,GB)
I outParam[0] = Total capacity
I outParam[1] = Unallocated capacity
I
outParam[2] = Allocated capacity
I outParam[3] = Unincluded capacity
I
outParam[4] = Included capacity
I outParam[5] = Redundant capacity
I outParam[6] = Active spare capacity
getStorageDasdScsiVa7xxxRedundancygroupMinimumNumber
Returns the lowest numbered redundancy group of a VA7xxx array.
I inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = Redundancy group
I
outParam[0] = Minimum redundancy group
getStorageDasdScsiVa7xxxRedundancygroupMaximumNumber
Returns the highest numbered redundancy group of a VA7xxx array.
I inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = Redundancy group
I outParam[0] = Maximum redundancy group
getStorageDasdScsiVa7xxxTotalCapacity
Returns the total raw capacity of the specified storage array.
I
inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = Units (B,MB,GB)
I outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxUnallocatedCapacity
Returns the unallocated capacity – that is, space not included in volume groups - for the
specified storage array.
I inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = Units (B,MB,GB)
I outParam[0] = Device capacity (MB - unless overridden by inParam[1])