HP StorageWorks 8000 - NAS Command Reference Manual page 71

setClusterAutoStartTimeout
Stores the timeout in the registry. (How long to wait, in seconds, before timeout occurs.)
I
InParam[0] = Interval, in seconds
getClusterNetworkPollingInterval
Gets the timeout from the registry.
I OutParam[0] = Time period, in seconds, before polling occurs
setClusterNetworkPollingInterval
Stores the timeout in the registry: how long to wait, in seconds, before polling.
I
InParam[0] = Interval, in seconds, between polling events
getClusterMaxConfiguredPackages
Gets the value from the registry.
I
OutParam[0] = Maximum number of packages allowed to run
setClusterMaxConfiguredPackages
Stores the number in the registry.
I InParam[0] = Maximum number of packages allowed to run
getClusterNtpLocalMaster
Stores the number in the registry.
I OutParam[0] = Hostname or IP address of cluster node that is currently serving as an
NTP master server for time synchronization.
setClusterNtpLocalMaster
Assigns one of the cluster nodes to be an NTP master server for time synchronization. Establishes
a stratum 10 NTP server on one node, other nodes are made to synchronize with the local
master.
I InParam[0] = Cluster node name
I
InParam[1] = Cluster node IP address
getClusterCallTimeout
Returns the value from the registry.
I OutParam[0] = Timeout, in seconds
restartClusterAntivirus
Executes restartClusterNodeAntivirus restartClusterNodeAntivirus on all cluster nodes. restartClusterNodeAntivirus restartClusterNodeAntivirus
restartClusterNodeAntivirus
Restarts the antivirus software.
Command Reference 69