HP StorageWorks 8000 - NAS Command Reference Manual page 54

52 Command Reference
setSystemDate
Sets the system date.
I
inParam[0] = Date [MM/DD/YYYY] or "NOW"
getSystemTime
Displays the current system time.
I inParam[0] = optional format string
I outParam[0] = Time according to format (default is "%T")
Common formats follow. Default format is "%m/%d/%Y %T".
I %c - TIME & DATE for locale
I %x - DATE for locale
I %X - TIME for locale
I %r - Time am/pm (exact format may change with locale)
I %R - %H:%M
I %T - %H:%M:%S (24 hour)
I
%D - %m/%d/%y - (United States specific format)
setSystemTime
Sets the current system time.
I inParam[0] = Time [24HH:MM:SS] or "NOW"
getSystemTimezoneCurrentGmt
I outParam[0] = GMT value
getSystemTimezoneEnabled
Informs whether time zones are enabled on the HP NAS 8000.
I inParam[0] = Time zone name
I outParam[0] = Enable status
setSystemTimezoneEnabled
Enables time zone support.
I inParam[0] = Time zone name
I
inParam[1] = Enable
getSystemTimezoneCurrentDescription
Displays the current time zone setting description.
I inParam[0] = Time zone name
I outParam[0] = Time zone description