HP StorageWorks 8000 - NAS Command Reference Manual page 22

20 Command Reference
getStorageDasdDeviceFile
Returns the name of the device file used to access the specified DASD.
I
inParam[0] = DASD name
I outParam[0] = DASD device file
getStorageDasdScsiList
Returns a list of the storage devices attached to or allocated for use with the NAS 8000.
I outParam[0:N] = SCSI DASD name
getStorageDasdScsiGenericDeviceFile
Returns the absolute path to the SCSI generic device file for a DASD.
I inParam[0] = DASD name
I outParam[0] = DASD generic device file
getStorageDasdScsiHost
Returns the SCSI driver host number for a DASD.
I inParam[0] = SCSI DASD name
I outParam[0] = Host number
getStorageDasdScsiChannel
Returns the SCSI HBA channel number used to access the SCSI DASD.
I
inParam[0] = DASD name
I outParam[0] = DASD channel number
getStorageDasdScsiTargetId
Returns the SCSI target ID number used to access the SCSI DASD.
I inParam[0] = SCSI DASD name
I
outParam[0] = SCSI DASD target ID
getStorageDasdScsiMaxNumberLuns
Returns the maximum number of LUNs supported by the system.
I outParam[0] = Maximum number of user data LUNs
getStorageDasdScsiVa71xxList
Returns a list of the storage arrays connected to the HP NAS 8000 system.
I
outParam[0:N] = SCSI DASD Va71xx name list
getStorageDasdScsiVa74xxList
Returns a list of VA74xx disk arrays attached to the system.
I
outParam[0:N] = SCSI DASD Va7xxx name list