HP StorageWorks 8000 - NAS Command Reference Manual page 67

setSystemUserQuota
Sets the quota settings for the specified user on the specified file volume.
I
inParam[0] = User name
I inParam[1] = Volume name
I inParam[2] = Soft limit
I inParam[3] = Hard limit
getSystemUserQuotaList
Returns a list of user quotas for the specified file volume.
I
inParam[0] = Volume name
I outParam[0:N] = Quota
getSystemGroupQuotaList
Returns a list of group quotas for the specified file volume.
I inParam[0] = Volume name
I outParam[0:N] = Quotas
getSystemUserGracePeriod
Displays the grace period – the amount of time users will have access to the space after their
quota is reached – for the specified file volume. The time a user who has exceeded their soft
quota has to remove data and bring their storage usage under their soft quota. If the grace
period runs out, the user will be blocked from any further writes.
I
inParam[0] = Volume name
I outParam[0] = Grace period in seconds
setSystemUserGracePeriod
Sets the grace period – that is the amount of time users will have access to the space after their
quota is reached – for the specified file volume.
I inParam[0] = Volume name
I inParam[1] = Grace period in seconds
getSystemGroupGracePeriod
Displays the grace period – that is the amount of time groups will have access to the space after
their quota is reached – for the specified file volume.
I inParam[0] = Volume name
I outParam[0] = Grace period in seconds
setSystemGroupGracePeriod
Sets the grace period – that is the amount of time groups will have access to the space after their
quota is reached – for the specified file volume.
I inParam[0] = Volume name
I inParam[1] = Grace period in seconds
Command Reference 65