General System Settings
58
Command Reference
getSystemUpsTitle
Returns the system title of the specified UPS.
I
inParam[0] = Name of UPS
I
outParam[0] = Title of UPS
These commands are used to review general system information and to reboot or shut down the
NAS server.
getSystemManufacturer
Returns the system manufacturer name (Hewlett-Packard).
I
outParam[0] = Manufacturer
getSystemOsBuildNumber
Returns the build number of the operating system in the active boot partition.
I
OutParam[0] = Build number
getSystemOsVersion
Returns the version number for the OS installed on the NAS server.
I
outParam[0] = OS version
getSystemProductAssetTag
Returns the asset tag assigned to the HP NAS 8000 system.
I
outParam[0] = Asset tag
getSystemProductName
Returns the product name.
I
outParam[0] = Product name
getSystemProductNumber
Returns the product number.
I
outParam[0] = Product number
getSystemNasSerialNumber
Returns the HP NAS 8000 solution's serial number.
I
outParam[0] = Serial number
getSystemMotherboardSerialNumber
Returns the serial number of the NAS server mother board.
I
OutParam[0] = Serial number