getStorageDasdScsiLunRedundancygroup
Returns the redundancy group number that this DASD LUN is on. This command should only be
used on LUNs that are on an HP VA7xxx storage array.
I
inParam[0] = SCSI LUN name
I
outParam[0] = Redundancy group number
getStorageDasdScsiLunNumber
Returns the number of the specified LUN.
I
inParam[0] = SCSI LUN name
I
outParam[0] = LUN number
getStorageDasdScsiLunCapacity
Returns the capacity of the specified LUN.
I
inParam[0] = SCSI LUN name
I
inParam[1] = Units (B,MB,GB)
I
outParam[0] = LUN capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiLunInUse
Informs whether the specified LUN is in use, that is, whether it is part of a volume group.
I
inParam[0] = SCSI LUN name
I
outParam[0] = T (in use) or F (Not in use)
getStorageDasdScsiLunDasd
Returns the name of the specified LUN.
I
inParam[0] = SCSI LUN name
I
outParam[0:N] = DASD name
Command Reference
27