HP StorageWorks 8000 - NAS Command Reference Manual page 11
Hp surestore nas 8000 command reference manual
Hide thumbs
Also See for StorageWorks 8000 - NAS:
- User manual (268 pages) ,
- Overview (59 pages) ,
- Installation and user manual (42 pages)
Table of Contents
Advertisement
setNetworkCardIpAddress
Sets the IP address for the specified NIC. The IP address and subnet mask for the primary NIC
must be defined before you can access the HP Command View NAS web interface from a client
system.
I
inParam[0] = Network card name
I
inParam[1] = IP address
getNetworkCardMacAddress
Returns the MAC address for the specified NIC.
I
inParam[0] = Network card name
I
outParam[0] = MAC address
getNetworkCardMtu
Returns the Maximum Transmissible Unit (MTU) for the specified gigabit NIC. The MTU is the
size of data packets that are sent across the network.
I
inParam[0] = Network card name
I
outParam[0] = MTU
setNetworkCardMtu
Sets the MTU size for the specified gigabit NIC. The MTU is the size of data packets that are sent
across the network.
I
inParam[0] = Network card name
I
inParam[1] = MTU
getNetworkCardReceiveErrors
Returns the number of errors received by the specified NIC since any NIC configuration changes
were made.
I
inParam[0] = Network card name
I
outParam[0] = Receive Error Count
getNetworkCardReceivePackets
Returns the number of packets received by the specified NIC since any NIC configuration
changes were made.
I
inParam[0] = Network card name
I
outParam[0] = Receive packet count
getNetworkCardSpeed
Returns the speed of the specified NIC.
I
inParam[0] = Network card name
I
outParam[0] = Speed
Command Reference
9
Advertisement
Chapters
Table of Contents
