System Ntp Settings - HP StorageWorks 8000 - NAS Command Reference Manual

System NTP Settings

getSystemTimezoneCurrentCountry
Displays the current time zone country.
I
inParam[0] = Time zone name
I outParam[0] = Time zone country
getSystemTimezoneList
Displays the available time zone names.
I outParam[0:N] = Time zone names
getSystemTimezoneCurrentName
Displays the current system time zone.
I inParam[0] = Time zone name
getSystemTimezoneCurrentGmt
Displays the offset from GMT for the current system time zone.
I outParam[0] = Offset in hours
Example: -0700
The following commands are used to set the Network Time Protocol (NTP) and choose a server
with which the NAS 8000 can synchronize system time.
addSystemNtpServer
Adds a server to the list of hosts from which to get NTP time synchronization information.
I InParam[0] = Hostname or NTP server IP address
getSystemNtpEnabled
Determine whether the server is configured to sync its system time with NTP servers.
I outParam[0] = T or F
getSystemNtpServerList
Gets the list of NTP servers from which the system is currently getting NTP time synchronization
information.
I outParam[0:N] = List of NTP server hostnames/IP addresses
setSystemNtpEnabled
Enables or disables NTP time synchronization
I inParam[0] = T or F
Command Reference 53