HP StorageWorks 8000 - NAS Command Reference Manual page 44

42 Command Reference
getNetworkSmbSecurityMode
There are two Windows NT security modes:
Share-Level Security: The HP NAS 8000 handles its own security. Shares may be password-
protected and may limit your access (read-only and/or read/ write) to data. You may define a
password when you create the share.
User-Level Security: A domain controller is used to authenticate users when they access the HP
NAS 8000. This requires specifying the domain name.
Returns the current SMB security mode.
I
outParam[0] = SHARE or DOMAIN
setNetworkSmbSecurityMode
Sets the SMB Windows sharing security mode.
I inParam[0] = SHARE or DOMAIN
I inParam[1] = Domain/workgroup name
getNetworkSmbDomainControllerList
Returns the domain controller list for SMB Windows share settings.
I outParam[0:N] = Domain controller WINS names
setNetworkSmbDomainControllerList
If your SMB is controlled by specifying domain controllers, enter the NetBIOS name of the
domain controller that is used to authenticate users. Do not include domain information with the
NetBIOS name. You can specify more than one domain controller (backup domain controllers),
but list them in the order you want them accessed.
Sets the SMB domain controller list for Windows sharing.
I inParam[0:N] = Domain controller WINS names
getNetworkSmbDomainList
Get the Windows domains that the NAS 8000 has been joined to.
I outParam[0:N] = Joined domain name list
getNetworkSmbDomainName
Get the name of the Windows domain that the NAS 8000 is currently joined to.
I outParam[0] = Domain/workgroup name
joinNetworkSmbDomain
Join the NAS 8000 to a specific Windows domain.
I inParam[0] = Domain name
removeNetworkSmbDomain
Removes the HP NAS 8000 from the specified SMB domain.
I inParam[0] = Domain name