HP StorageWorks 8000 - NAS Command Reference Manual page 13

getNetworkCardBondSlaveEnabled
Identifies whether the specified NIC is a bond slave.
I
inParam[0] = Network card name
I outParam[0] = T (Enabled) or F (Disabled)
bondEnslaveNetworkCard
Sets the specified NIC to be a bond slave of the specified master NIC.
I inParam[0] = Network card name
I inParam[1] = Bond master card handle
bondReleaseNetworkCard
Releases the specified NIC from bonds.
I inParam[0] = Network card name
getNetworkCardBondMonitorInterval
Returns the bond monitoring interval (in milliseconds) for the selected NIC.
I inParam[0] = Network card name
I outParam[0] = Bond monitor interval
setNetworkCardBondMonitorInterval
Sets the bond monitoring interval (in milliseconds) for the selected NIC.
I
inParam[0] = Network card name
I inParam[1] = Bond monitor interval
getNetworkCardBondUpDelay
Returns the time (in milliseconds) for the selected NIC to delay after bondEnslave before
bringing the bond link up.
I inParam[0] = Network card name
I outParam[0] = Bond up delay
setNetworkCardBondUpDelay
Sets the time (in milliseconds) for the specified NIC to delay after bondEnslave before bringing
the bond link up.
I inParam[0] = Network card name
I
inParam[1] = Bond up delay
getNetworkCardBondDownDelay
Returns the time (in milliseconds) for the specified NIC to delay after bondRelease before taking
the bond link down.
I inParam[0] = Network card name
I
outParam[0] = Bond down delay
Command Reference 11