HP StorageWorks 8000 - NAS Command Reference Manual page 46

44 Command Reference
getStorageShareNfsName
Returns the UNIX NFS share name for the specified share.
I
inParam[0] = Volume name
I inParam[1] = Share path
I outParam[0] = NFS name
OR (see getStorageShareList getStorageShareList). This facilitates webFilter usage. getStorageShareList getStorageShareList
I inParam[0] = Volume name:_*_:Share path
I
outParam[0] = NFS name
getStorageShareNfsReadOnly
Informs whether the specified share is set for UNIX NFS read-only or read/ write access.
I inParam[0] = Volume name
I inParam[1] = Share path
I outParam[0] = T (ReadOnly) or F (ReadWrite)
OR (see getStorageShareList getStorageShareList). This facilitates webFilter usage.
getStorageShareList getStorageShareList
I inParam[0] = Volume name:_*_:Share path
I outParam[0] = T (ReadOnly) or F (ReadWrite)
setStorageShareNfsReadOnly
Sets the specified share to UNIX NFS read-only or read/write access.
I inParam[0] = Volume name
I
inParam[1] = Share path
I inParam[2] = T (ReadOnly) or F (ReadWrite)
OR (see getStorageShareList getStorageShareList). This facilitates webFilter usage.
getStorageShareList getStorageShareList
I
inParam[0] = Volume name:_*_:Share path
I inParam[1] = T (ReadOnly) or F (ReadWrite)
getNetworkNfsTrustedHostList
Displays the list of UNIX hosts allowed access to the system.
I outParam[0:N] = Trusted host list for NFS
setNetworkNfsTrustedHostList
Sets the IP address and host name of any trusted hosts. Root users on trusted hosts are given root
user privileges on the HP NAS 8000.
I inParam[0:N] = Trusted host list for NFS