HP StorageWorks 8000 - NAS Command Reference Manual page 25

getStorageDasdScsiVa7xxxAllocatedCapacity
Returns the allocated capacity – that is, space included in volume groups – for the specified
storage array.
I inParam[0] = SCSI VA7xxx DASD name
I
inParam[1] = Units (B,MB,GB)
I outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxActiveSpareCapacity
Returns the capacity of the active spare on the specified storage array.
I inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = Units (B,MB,GB)
I
outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxUnincludedCapacity
Displays the unincluded capacity – that is, space not included in LUNs – of the specified storage
array.
I inParam[0] = SCSI VA7xxx DASD name
I
inParam[1] = Units (B,MB,GB)
I outParam[0] = Device capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxIncludedCapacity
Gets the included capacity of a redundancy group on a VA7xxx storage array. Included
capacity is the sum of the capacities of all disk drives that are in use.
I inParam[0] = VA7xxx DASD name
I inParam[1] = Redundancy group (* for all redundancy groups).
I inParam[2] = Units (B,MB,GB)
I outParam[0] = Included capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxRedundantCapacity
Returns the redundant capacity – that is, the space used for data redundancy for the current
RAID setting – on the specified storage array.
I
inParam[0] = SCSI VA7xxx DASD name
I inParam[1] = Units (B,MB,GB)
I outParam[0] = Device capacity (MB - unless overridden by inParam[1])
scanStorageDasdScsiVa7xxx
Updates the list of arrays connected to the HP NAS 8000 system. Used when devices are added
or removed.
I inParam[0] = SCSI VA7xxx DASD name
Command Reference 23