HP StorageWorks 8000 - NAS Command Reference Manual page 75

getClusterPackageAutoRun
Gets from the registry, value of AutoRun for this package.
I
InParam[0] = Package name
I OutParam[0] = T or F
setClusterPackageAutoRun
Sets in the registry, the AutoRun value for the given package. The default is T.
I InParam[0] = Package name
I InParam[1] = T or F
getClusterPackageNodeFailFastEnabled
Gets from the registry, value of NodeFailFastEnabled for this package.
I InParam[0] = Package name
I
OutParam[0] = T or F
setClusterPackageNodeFailFastEnabled
Sets in the registry, the NodeFailFastEnabled value for the given package. The default is F.
I InParam[0] = Package name
I InParam[1] = T or F
I OutParam[0] = None
getClusterPackageServiceFailFastEnabled
Gets from the registry, the value of ServiceFailFastEnabled for this package.
I
InParam[0] = Package name
I OutParam[0] = T or F
setClusterPackageServiceFailFastEnabled
Sets in the registry, the ServiceFailFastEnabled value for the given package. The default is F.
I InParam[0] = Package name
I InParam[1] = T or F
I OutParam[0] = None
getClusterPackageServiceHaltTimeout
Gets from the registry, the value of service halt timeout for this package.
I
InParam[0] = Package name
I OutParam[0] = Number, in seconds
Command Reference 73