HP StorageWorks 8000 - NAS Command Reference Manual page 18

16 Command Reference
getNetworkSnmpTrapDestDomain
Returns the Domain for this Trap Destination (currently only "UDP" is supported).
I
inParam[0] = Destination number
I outParam[0] = Value
setNetworkSnmpTrapDestDomain
Sets the Domain for this Trap Destination (currently only "UDP" is supported).
I inParam[0] = Destination number
I inParam[1] = Value
getNetworkSnmpTrapDestAddress
Returns the address for this Trap Destination.
I inParam[0] = Destination number
I
outParam[0] = Value
setNetworkSnmpTrapDestAddress
Sets the address for this Trap Destination. May be numeric (1.2.3.4) or DNS hostname
(snmp.hp.com).
I
inParam[0] = Destination number
I inParam[1] = Value
getNetworkSnmpTrapDestPort
Returns the port set for the SNMP trap (default: 162).
I inParam[0] = Destination number
I outParam[0] = Port
setNetworkSnmpTrapDestPort
Sets the port number for the SNMP trap (default: 162).
I inParam[0] = Destination number
I
inParam[1] = Port
setNetworkSnmpTrapDestStatus
Sets the Status for this Trap Destination. See www.hp.com/support/nas8000 for information on
trap status.
I
inParam[0] = Destination number
I inParam[1] = Value
getNetworkSnmpTrapDestStatus
Returns the Status for this Trap Destination. See www.hp.com/support/nas8000 for information
on trap status.
I
inParam[0] = Destination number
I outParam[0] = Value