HP StorageWorks 8000 - NAS Command Reference Manual page 26
Hp surestore nas 8000 command reference manual
Hide thumbs
Also See for StorageWorks 8000 - NAS:
- User manual (268 pages) ,
- Overview (59 pages) ,
- Installation and user manual (42 pages)
Table of Contents
Advertisement
24
Command Reference
shutdownStorageDasdScsiVa7xxx
Shuts down the specified storage array.
I
inParam[0] = SCSI VA7xxx DASD name
restartStorageDasdScsiVa7xxx
Restarts the specified storage array.
I
inParam[0] = SCSI VA7xxx DASD name
getStorageDasdScsiVa7xxxLunList
Returns a list of LUNs on the specified storage array.
I
inParam[0] = SCSI VA7xxx DASD name
I
outParam[0:N] = LUN number list
getStorageDasdScsiVa7xxxLunMinimumCapacity
Returns the minimum size that can be used to create a LUN.
I
inParam[0] = SCSI VA7xxx DASD name
I
inParam[1] = Units (B,MB,GB)
I
outParam[0] = LUN minimum capacity (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxLunCapacityIncrement
LUN sizes must be defined using this increment. Default is 1MB.
I
inParam[0] = SCSI VA7xxx DASD name
I
inParam[1] = Units (B,MB,GB)
I
outParam[0] = LUN capacity increment (MB - unless overridden by inParam[1])
getStorageDasdScsiVa7xxxLunMinimumNumber
Returns the minimum allowed LUN number. Currently 1.
I
inParam[0] = SCSI VA7xxx DASD name
I
outParam[0] = Minimum LUN number
getStorageDasdScsiVa7xxxLunMaximumNumber
Returns the maximum allowed LUN number. Currently 127.
I
inParam[0] = SCSI VA7xxx DASD name
I
outParam[0] = Maximum LUN number
addStorageDasdScsiVa7xxxLun
Adds a LUN of the specified size to the specified storage array.
I
inParam[0] = SCSI VA7xxx DASD name
I
inParam[1] = LUN number
I
inParam[2] = Device capacity (MB)
Advertisement
Chapters
Table of Contents
