Table of Contents
Advertisement
_k
AnalWARNING:
To maintain proper
tool grounding, whenever the outlet you
are planning to use for this power tool
is of the two prong type do not remove
or alter the grounding prong in any man-
ner.
An adapter is available for connecting plug to
2-prong receptacles.
The green grounding
lead extending from the adapter must be con-
nected to a permanent
ground such as to a
properly grounded outlet box. (Figure 135)
Grounding
Lug
3-Prong Plug o,"
_Make
Sure This Is
Ir._-,L_
Connected
To A
,__
_! _L
Kn°wn Gr°und
_
2-Prong
Receptacle
Adapter
Extension
Cords
The use of any extension cord will cause
some loss of power. Use the following table
to determine
the minimum wire size
(A.W.G.) extension cord. Use only 3- wire ex-
tension cords which have 3-prong grounding
type plugs and 3-pole receptacles
which ac-
cept the tool's plug.
Length of
Conductor
Wire sizes Required
(American
Wire Gage No.)
120V Lines
240V Lines
0 - 25 feet
No.14
No. 16
26 - 50 feet
No.12
No. 14
51 - 100 feet
No. 8
No. 12
For circuits that are farther away from electri-
cal circuit box, the wire size must be in-
creased proportionately
in order to deliver
ample voltage to the saw motor.
Fig. 135 - Adapter for 2-Prong Receptacles
_ib WARNING:
The adapter illustrated
is for use only if you already have a
properly grounded 2-prong receptacle.
57
Hide quick links:
Advertisement
Table of Contents
