Cable Locations - Xerox DocuPrint 96 Installation Planning Manual

Cable locations

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE
Power cables DocuPrint 96/DocuPrint 96MX LPS power cable lengths are as
follows:
•
System Controller: 15 feet/4.5 m
•
Printer: 5 feet/6 feet/1.8 m/4.5 m (60 Hz)
•
Keyboard/display: 15 feet/4.5 m
•
Peripheral cabinet option: 15 feet/4.5 m.
Note:
installed in a raised-floor environment. You should also consider that
part of a cable's length is routed inside the equipment to connect with
interior power or data receptacles.
To run the cables beneath the flooring effectively, you need to know
where the cables enter and exit the printer and the system controller.
Figure 3-10 shows those locations (marked with an X).
Figure 3-10. Cable enter/exit locations (top view)
17 feet/5.1m (50 Hz, no plug)
Cable length loss must be factored in if equipment is
PREINSTALLATION
3-11