Cable Locations - Xerox DocuPrint 92C Installation Planning Manual

SYSTEM CONNECTIONS

Cable locations

7-2 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
To run the cables beneath the flooring effectively, it is necessary to
know where the cables enter and exit the printer. The following
diagrams show those locations (marked with an X).
All power cords attach to the back of the printer. Listed below are the
distances of the printer power cord attachments from the left end of
the printer as you face it.
Figure 7-1. Cable enter/exit location (top view)
1
4 in / 10 cm
4 in / 10 cm
3
1 Back of system
2 Front of system
3 Printer
2