Xerox DocuPrint 96 Installation Planning Manual page 23

LPS OVERVIEW
Sample tray The sample tray located on top of the printer holds up to 100 sheets
of paper. Output such as transparencies and sample prints of fonts
or forms are sent to the sample tray.
Purge tray The purge tray is located on top of the feeder/stacker module.
Aborted sheets (for example, damaged sheets or sheets cleared
after a paper jam) are sent to this tray. The purge tray can hold up to
100 sheets of paper.
Printer control console The printer control console is the color monitor located on top of the
printer. It contains message areas and graphic displays that alert you
to paper jams and other fault conditions, such as low toner. The
printer control console also contains buttons which allow you to
control certain functions of the printer (for example, continuing an
interrupted job) without returning to the terminal.
Attention light An attention light is mounted on top of the inverter module. The
attention light signals when the printer requires operator attention.
Attention alarm The attention alarm sounds when the printer requires operator
attention. The alarm may be disabled by the operator.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 1-5