Remote Ip Phones Behind Nat - Altigen AltiWare ACM 5.1 Administration Manual

Altiware acm 5.1 administration manual altigen communications

Hide thumbs Also See for AltiWare ACM 5.1:

Table of Contents

Appendix C: Network Ports

Y1 = X1 + Total IP codec channels in GW1 x 2

Gateway ID = 2

X2 = 49152 + 512 x 2

Y2 =X2 + Total IP codec channels in GW2 x 2

Gateway ID=n

X(n)=49152 + 512 x n

Y(n)=X(n) + Total IP codec channels in GW(n) x 2

To connect the following applications through a

AltiView/AltiAgent/IPTalk VM service for AltiView/

AltiView/AltiAgent MeetMe Conference

AltiSupervisor

Client Applications Auto Update

(VRManager may not work behind NAT)

AltiWeb Client

TAPI Client login to AltiServ

AltiServ connects the following application

through a firewall

External CDR Logger Service

Remote IP Phones Behind NAT

For remote IP phones behind NAT, you don't need to do any configuration. However, if

the remote firewall/NAT router blocks outgoing traffic, then you will need to open the

following ports on the remote firewall/NAT router:

AltiWare ACM 5.1 Administration Manual