Application Extension Configuration; Application Extension Setup - Altigen AltiWare ACM 5.1 Administration Manual

Application Extension Configuration

The application extension is an extension pilot number that allows an SDK-based add-
on application to log into the system and establish a communication channel to control
trunk channels and interact with the system core PBX switching and voice processing
service.
Typical applications that use an application extension are:
IVR
•
Outbound dialer
•
Inbound call routing logic for a special business application
•
To connect an SDK-based add-on application, you need:
An APC license (concurrent session)
•
A separate application extension to log in to for each application
•
For more information about SDK, please send e-mail to sdksupport@altigen.com.

Application Extension Setup

Note:
Before you begin, make sure a Trunk Control APC SDK Session license is
registered and activated for your system. You can find this information in Help >
About, and then click License Information.
To access the Application Extension Configuration window, select System >
Application Ext Configuration. The configuration window opens:
AltiWare ACM 5.1 Administration Manual 25
C
H A P T E R
4