Creating A Repair Disk Or A Startup Diskette; Reviewing The System Introduction - Intergraph InterServe 05 Setup Manual

12
If the system requires Quick-Fix Engineering (QFE) update software, it is included in the
system software available for backup diskette creation. QFE update software contains fixes
for operating system problems or limitations on your Intergraph system, and is only shipped
with the system if it is needed. If QFE update software is shipped with the system, you should
create a QFE backup diskette for use if you have to re-install the operating system.
Refer to Version Manager Help for information on creating Intergraph system software.
Check the Intergraph site on the World Wide Web and vendor bulletin boards frequently for
new and updated drivers.

Creating a Repair Disk or a Startup Diskette

If you did not create an Emergency Repair Disk during Setup, select Repair Disk on the
Welcome dialog to create one. The files on this diskette can restore the original contents of a
damaged Registry (that is, at the time the operating system was installed), along with the
standard operating system drivers. You should also update a Repair Disk after you finish
configuring the system.
Refer to the operating system documentation and Help for information on creating a Repair
Disk.

Reviewing the System Introduction

Click the button on the System Introduction tab to display the System Introduction. This
document is an online introduction to your new system in Windows Help 4.0 format, covering
such subjects as system features, system controls and connections, and Intergraph customer
support. Review the information in the System Introduction to become more familiar with
your system.
You can also view the System Introduction by opening the
NOTE
:\ 32
C WIN APP
an icon, a shortcut, or a system menu to make it easier to display.
\ directory on your system. You may want to link the
SYSINTRO
. file in the
SYSINTRO HLP
SYSINTRO
. file to
HLP