Program - Kyocera TASKalfa 6550ci Operation Manual

Program

By registering sets of frequently used functions as a single program, you can simply press the program number
as needed to recall those functions. You can also name the programs for easy identification when recalling.
The programs below have been preregistered. The registered contents can be re-registered for easier use in
your environment.
Number
01
02
03
NOTE:
Up to 50 functions combining copying and sending can be registered in the program.
If user login administration is enabled, you can only register functions by logging in with administrator privileges.
Registering Programs
Use the procedure below to register a program.
The following procedure is an example of registering the copying function.
Program name
ID Card Copy
Eco Copy
Confidential Stamp
Default Registration
Copying function
Color: Black & White
Combine: [2 in 1]
Continuous Scan: [On]
Original Size: Statement (A5-R)
Paper Selection: Cassette 1
Zoom: Auto Zoom
Copying function
Color: Black & White
EcoPrint: [On] (Level [5])
Copying function
Color: Black & White
Prevent Bleed-thru: [On]
Stamp: Confidential
Font Size: middle
Font Color: [Black]
Stamp Position: [Center]
Display Pattern: [Transparent]
1
Press the Program key while the copy mode is
accessed.
2
Press [Add] and press a number (01 to 50) for the
program number.
If entering Program screen from the Copy screen,
Send screen or Document Box screen, go to step 4.
NOTE:
If you select a program number already
registered, the currently registered functions can be
replaced with a new set of functions.
3
Check that [Copy] is selected, and press [Next].
4
Enter the new program name and press [Save] to
register the program.
3-56
Basic Operation