Kyocera TASKalfa 6550ci Operation Manual page 483

Error Message
Removable memory
is full.*
Replace all originals
and press [Continue].
Replace the waste
toner box.
Remove originals in
the document
processor.
Scanner memory is
full.*
Send error.*
Staple is empty.*
Staple is empty.
(Manual Staple)
Staple jam.
System error.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
—
Is the waste toner box full?
Are there any originals left in
the document processor?
—
—
Has the document finisher
run out of staples?
Has staple cartridge holder
A run out of staples?
—
—
12-15
Corrective Actions
This job is canceled. Press [End].
Insufficient free space in the
removable memory. Delete unneeded
files.
Remove originals from the document
processor, put them back in their
original order, and place them again.
Press [Continue] to resume printing.
Press [Cancel] to cancel the job.
Replace the waste toner box.
Remove originals from the document
processor.
Scanning cannot be performed due to
insufficient memory of the scanner.
Follow the instructions on the touch
panel.
An error has occurred during
transmission. The job is canceled.
Press [End]. Refer to Responding to
Send Error for the error code and
corrective actions.
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the touch panel.
Leave the machine on and follow the
instructions to replace the staple case.
Press [Continue] to print without stapling.
Press [Cancel] to cancel the job.
Add staples to staple cartridge holder
A.
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instructions to remove the jammed
staple.
System error has occurred. Follow
the instructions on the touch panel.
Troubleshooting
Reference
Page
—
2-48
11-5
—
—
12-18
—
12
11-7
—
—