Kyocera TASKalfa 6550ci Operation Manual page 473

Symptom
When displaying an
image sent from the
machine on the PC, an
image size is shrunk
vertically or
horizontally.
Dirt on the top edge
or back of the paper.
Part of the image is
periodically faint or
blurred.
Part of the image is
periodically faint or
shows white lines.
White dots appear on
the image.
Skewed-color
printout.
Print on the back of
the sheet is visible on
the front.
The background
density is obtrusive.
Checkpoints
Have you selected
200×100dpi Normal or
200×400dpi Super Fine for
the scan resolution?
Check the paper chute and
the ramp.
—
—
—
—
—
—
—
12-5
Corrective Actions
Select a scan resolution other than
200×100dpi Normal or 200×400dpi
Super Fine when sending an
image.
Open the right cover and check for
toner on the paper ramp inside the
paper transfer unit. Clean the
paper ramp using a soft, dry, lint-
free cloth.
Run [Developer Refresh].
Run [Drum Refresh].
Run [Drum Refresh].
Run [Calibration].
Run [Color Registration].
Set [Prevent Bleed-through] to
[On].
Run [Background Density Adj.].
Troubleshooting
Reference
Page
—
—
9-74
9-68
12
9-68
9-73
9-70
4-42
6-25
9-22
4-40
6-22
9-21