Kyocera TASKalfa 6550ci Operation Manual page 116

With Document Finisher
3
2
1
Original
Collate/Offset
Collate
Offset
:
Original A4
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status
Collate/Offset
Collate
Offset
:
Original A4
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status
3
2
3
1
2
3
1
2
1
Copy (each set)
Copies
Off On
Off Each Set
Cancel OK
10/10/2010 10:10
Copies
Off On
Off Each Page
Cancel OK
10/10/2010 10:10
When you use offsetting, printed copies are segregated
after each set of copies (or after each page).
NOTE:
The optional document finisher is required.
The paper sizes supported in Offset are A3, B4, A4,
B5, Letter, Legal, Ledger, Oficio II, 8k, 16k,
216×340mm, Folio.
The procedure for using collate/offset copying is
explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Collate/
Offset].
4
To use collate copying, press [On] of Collate.
To use offset copying, press [Each Set] of Offset.
Press [OK].
If [Off] is selected for Collate, press [Off] or [Each
Page] of Offset.
5
Press [OK].
6
Press the Start key. Copying begins.
3-16
Basic Operation