Color Selection - Kyocera TASKalfa 6550ci Operation Manual

Color Selection

This feature allows you to select the color mode used for scanning when sending images. You can select from
Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.

Color Selection

Select scanning color.
Use [Auto Color] to automatically produce color originals
in full color and black & white originals in black & white.
Auto Color
(Color/Gray)
:
Original A4
Zoom : 100%
:
Send A4
Full Color
Preview
Add Shortcut
Status
Destination
Auto Color
(Color/B & W)
Grayscale Black & White
Cancel OK
10/10/2010 10:10
6-23
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Color
Selection].
4
Select the color mode to be used for scanning.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Sending Functions
6