Kyocera TASKalfa 6550ci Operation Manual page 114

Book to One-sided
1
Original
Book to Two-sided
1 2 3 4
2 1 4 3
Original
The procedure for using two-sided/duplex copying is explained below.
Duplex
1-sided
>>1-sided
1-sided
>>2-sided
2-sided
>>1-sided
2-sided
>>2-sided
:
Original A4
Book
Zoom : 100%
>>1-sided
Paper : A4
Book
Preview
>>2-sided
Add Shortcut
Status
2
1 2
Copy
Facing pages
Facing pages
-> Facing pages
-> Two-sided
3
1 2
1
3
2 1
1
Copy
Copies
Finishing
Top Edge
on Top
Binding Binding
Original
Left/Right
Top
Orientation
Cancel OK
10/10/2010 10:10
Produces a 1-sided copy of a 2-sided or open book
original.
The following binding options are available.
• Binding Left: Originals with facing pages are
copied from left to right.
• Binding Right: Originals with facing pages are
copied from right to left.
NOTE:
The following sizes of originals and paper are
supported in Two-sided to One-sided and Book to One-
sided. Original: A3, B4, A4-R, B5-R, A5-R, Ledger,
Letter-R and 8K. Paper: A4, B5, Letter and 16K. You
may change paper size and reduce or enlarge copy to
match that size.
Produces two-sided copies from an open book original
with facing pages.
NOTE:
The following sizes of originals and paper are
supported in Book to Two-sided mode. Original: A3,
B4, A4-R, B5-R, A5-R, Ledger, Letter-R and 8K. Paper:
A4, B5 and Letter.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Duplex].
4
Select the desired Duplex option.
5
If you choose [1-sided>>2-sided] or
[2-sided>>2-sided], select the binding edge of the
finished copies of Finishing.
If you choose [Book>>2-sided], press [Book>>2-
sided] or [Book>> Book] of Finishing to select the
setting for duplex.
3-14
Basic Operation