Paper - Kyocera TASKalfa 6550ci Operation Manual

Side Feeder (3,000-sheet)
In addition to the printer's cassettes, you can also install an optional side feeder (3,000-sheet) capable of holding
up to 3,000 sheets of A4, B5 or Letter paper. Refer to Side Feeder (3,000-sheet) (Option) on page 2-37 for
loading paper.
Side Feeder (500-sheet x 3)
Three additional cassettes identical to cassette 1 can be installed in the printer. Paper capacity and loading
method are the same as cassette 1.
Large Capacity Side Feeder (500, 1,500-sheet x 2)
In addition to the printer's cassettes, you can also install the additional cassette identical to cassette 1 and an
optional feeder (3,500-sheet) capable of holding up to 3,500 sheets of A4, B5 or Letter paper.
Document Finisher
This is a large-capacity document finisher capable of holding large print runs and of separating and offsetting
multiple copies of a printout into individual copies. It can also staple or hole-punch (optional) the offset printouts.
User can select manual staple by operation button. A mail box and folding unit are also available as options.
Manual staple mode
You can staple copied paper manually without any copying operation. It is useful when you have forgotten to set
the staple sort mode before starting copying, or when you want to staple originals.
NOTE:
Manual stapling cannot be executed when the machine is in operation.
If there are no staples when manual stapling is performed, the stapling position lamps and stapling position
button LEDs all blink. Add staples. For details, refer to Replacing Staples on page 11-7
Maximum number of sheets available for manual stapling
Paper size
A4, A4-R, B5, Letter, 16K
A3, B4, Folio
Use the buttons on the stapling control section of the Finisher (optional) for manual stapling.
Stapling position
lamps
( - 24.0 lb. Bond)
Stapling position
button button / lamp
Appendix-4
Paper weight
2
- 90 g/m
65 sheets
30 sheets
Stapling
2
91 - 105 g/m
(24.3 - 28.0 lb. Bond)
50 sheets
30 sheets