Border Erase To Back Page - Kyocera TASKalfa 6550ci Operation Manual

Border Erase to Back Page

When scanning a 2-sided original, this allows you to erase the borders on the back of the original. The table
below shows the available settings.
Same as Front
Page
Do Not Erase
NOTE:
You can change the default setting for Border Erase to Back Page. For details, refer to Paper
Selection on page 9-42.
Use the procedure below to erase borders when copying.
Border Erase
Border
Off
Border Erase
Sheet
Border Erase
Book
Gutter
Individual
Original : A4
Border Erase
Zoom : 100%
Paper : A4
Preview
Add Shortcut
Status
Border Erase
Off
Border Erase
Sheet
Border Erase
Book
Individual
:
Original A4
Border Erase
Zoom : 100%
:
Paper A4
Preview
Add Shortcut
Status
Item
Border Erase performed using the same setting
as the front page
No Border Erase performed on the back page
Copies
(0 - 50)
6
mm
Same as
# Keys
Front Page
Back Page
(0 - 50)
6
mm
# Keys
Cancel OK
10/10/2010 10:10
Copies
(0 - 50)
6
Top
mm
6
Bottom
mm
Same as
Front Page
6
Left
mm
Back Page
6
Right
mm
Top Edge
on Top
Original
Orientation
# Keys
Cancel OK
10/10/2010 10:10
Detail
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Border Erase].
4
Select [Border Erase Sheet] to erase borders for an
individual sheet or [Border Erase Book] to erase
borders for a book.
Use [+] or [–] to enter the width in Border or Gutter.
Press [# Keys] to use the numeric keys for entry.
Press [Individual Border Erase] to select the
individual border erase.
Use [+] or [–] to enter the width in Top, Bottom, Left
or Right. Press [# Keys] to use the numeric keys for
entry.
Press [Original Orientation] to select the original
orientation from either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].
For 2-sided originals, press [Back Page] and then
press [Same as Front Page] or [Do Not Erase].
5
Press [OK].
6
Press the Start key to start copying.
4-19
Copying Functions
4