Changing Template Data - Kyocera TASKalfa 650c Copying Manual

6 TEMPLATES

Changing template data

In the template menu, select the group to which the desired template is registered.
1
1) Press the [REGISTRATION] tab.
2) Press the button for the desired group.
3) Press [OPEN].
To switch the menu
Press
Key in the group number (3 digits).
Enter the password as follows and then press [OK].
2
When the public template group is selected: Press [PASSWORD] and then enter the Admin Password (6 to 10
digits) with the buttons on the touch panel or the digital keys on the control panel.
When a private group is selected: Key in a 5-digit password set for the selected group. If no password is set, go
to step 3.
When you enter the wrong Admin Password 3 times consecutively, this equipment will become locked up for 30
seconds. In this case, wait until it is unlocked and then enter the correct password.
178 Changing Data
or .