Setting Share Folder - Kyocera TASKalfa 650c Copying Manual

3.BASIC COPY MODES
When all have been scanned, press [FINISHED] on the touch panel.
7
Copying and storing start.

Setting share folder

When a user who has the privilege of setting a share folder has pressed [REMOTE 1] or [REMOTE 2], the menu for
specifying a directory appears.
The setting items differ depending on a file transfer protocol to be used. FTP, SMB, NetWare IPX/SPX and NetWare TCP/
IP are selectable for a file transfer protocol.
FTP
When you press any of the buttons below, the on-screen keyboard appears. Enter with the buttons on the touch panel or
the digital keys on the control panel. When you finish the entry, press [OK].
SERVER NAME: Press this to enter the IP address of FTP server. For example, if the data should be transferred to an
FTP folder ftp://10.10.70.101/user01/scan/, key in "10.10.70.101".
NETWORK PATH: Press this to enter a network path to an FTP folder where the data are to be stored. For example, if the
data should be transferred to an FTP folder ftp://10.10.70.101/user01/scan/, enter "user01\scan".
LOGIN USER NAME: Press this to enter a user name to login to the FTP server. Enter this as required.
PASSWORD: Press this to enter a password to login to the FTP server. Enter this as required.
COMMAND PORT: Press this to key in a command port number for executing commands. Normally "-" is entered in this
field and it means a port number set by the administrator will be used. Change this only when you want to use any
other port number.
3 BASIC COPY MODES
Performing Copy & File 93