Kyocera TASKalfa 650c Operator's Manual
  1. Manuals
  2. Brands
  3. Kyocera Manuals
  4. Printer Accessories
  5. TASKalfa 650c
  6. Operator's manual

Kyocera TASKalfa 650c Operator's Manual

Multifunctional digital color systems
Hide thumbs Also See for TASKalfa 650c:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Operator's Manual
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS
Operator's Manual
GA-1310

Advertisement

Table of Contents
loading

Related Manuals for Kyocera TASKalfa 650c

Summary of Contents for Kyocera TASKalfa 650c

  • Page 1 MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS Operator's Manual GA-1310...
  • Page 2 ©2009 KYOCERA MITA Corporation All rights reserved...

  • Page 3: Preface

    Preface Thank you for purchasing Multifunctional Digital Color Systems. This manual provides information about system restrictions and the GA-1310 specific functions applied when the GA-1310 controller is connected to the same series. Read this manual before using your Multifunctional Digital Color Systems. Keep this manual within easy reach, and use it to configure an environment that makes the best use of this equipment’s functions.

  • Page 5: Table Of Contents

    CONTENTS Preface............................1 Chapter 1 RESTRICTIONS Operations from the Control Panel..................6 COPY ............................ 6 SCAN ............................ 6 PRINT............................ 7 FAX ............................7 USER FUNCTIONS....................... 8 JOB STATUS ........................9 INTERRUPT ........................10 COMMAND CENTER USER Mode ..................11 Launching COMMAND CENTER ..................11 COMMAND CENTER top page...................
  • Page 6 CONTENTS...
  • Page 7 RESTRICTIONS This chapter describes system restrictions when the GA-1310 controller is connected to the same series. Operations from the Control Panel..................6 COPY ..................................6 SCAN ..................................6 PRINT..................................7 FAX..................................7 USER FUNCTIONS ...............................8 JOB STATUS................................9 INTERRUPT .................................10 COMMAND CENTER USER Mode ..................11 Launching COMMAND CENTER .........................

  • Page 8: Restrictions

    1 RESTRICTIONS Operations from the Control Panel The same series machine with the GA-1310 controller attached has several restrictions in the following operations:  P.6 “COPY”  P.6 “SCAN”  P.7 “PRINT”  P.7 “FAX”  P.8 “USER FUNCTIONS”  P.9 “JOB STATUS” Buttons and items enclosed in red lines on the following screenshots in this section disappear or become dim when the controller is connected to the equipment.

  • Page 9: Print

    1 RESTRICTIONS 1.RESTRICTIONS  PRINT The following related to the [PRINT] button cannot be used when the controller is connected to the equipment:  The Private Print function for printing a document from a computer on the network only when a set password is keyed in to the equipment's control panel ...

  • Page 10: User Functions

    1 RESTRICTIONS  USER FUNCTIONS The same series machine with the GA-1310 controller attached has several restrictions in the following operation menus:  P.8 “USER menu in USER FUNCTIONS”  P.8 “ADMIN menu in USER FUNCTIONS”  USER menu in USER FUNCTIONS The following related to the USER menu cannot be used when the controller is connected to the equipment: ...

  • Page 11: Job Status

    1 RESTRICTIONS 1.RESTRICTIONS NETWORK menu in ADMIN menu The following provided for the NETWORK menu are unavailable.  [IPv6]  [IPX/SPX]  [NETWARE]  [SMB]  [APPLETALK]  [ETHERNET]  [IPsec]  [NETWORK CHECK] Machine without the controller Machine with the controller The setting operations for [IPv4] and [HTTP] differ depending on the equipment with or without the controller.

  • Page 12: Interrupt

    1 RESTRICTIONS  INTERRUPT The [INTERRUPT] button on the control panel cannot be used while printing is in progress when the controller is connected to the equipment. For details on the [INTERRUPT] button, refer to the Copying Guide. Operations from the Control Panel...

  • Page 13: Command Center User Mode

    1 RESTRICTIONS COMMAND CENTER USER Mode The same series machine with the GA-1310 controller attached has several restrictions in the following COMMAND CENTER USER mode operations:  P.11 “Launching COMMAND CENTER”  P.11 “COMMAND CENTER top page”  P.12 “Registering from COMMAND CENTER” ...

  • Page 14: Registering From Command Center

    1 RESTRICTIONS Machine with the controller For details on the COMMAND CENTER top page, refer to the COMMAND CENTER Guide.  Registering from COMMAND CENTER  Registering private templates The following combinations of private template agents cannot be used when the controller is connected to the equipment: ...

  • Page 15: Setting Up Mailboxes

    1 RESTRICTIONS 1.RESTRICTIONS When the controller is connected to the equipment, the GA-1310 specific agents ([SMB/FTP/OTHER] check box) appear in the above page. From this page, you can create the GA-1310 specific private templates. For instructions on how to create them, see the following section: ...

  • Page 16: Command Center Admin Mode

    1 RESTRICTIONS COMMAND CENTER ADMIN Mode The same series machine with the GA-1310 controller attached has several restrictions in the following COMMAND CENTER ADMIN mode operations:  P.14 “Setting up from COMMAND CENTER”  P.16 “Maintaining from COMMAND CENTER”  P.17 “Registering from COMMAND CENTER” ...
  • Page 17 1 RESTRICTIONS 1.RESTRICTIONS Machine without the controller Machine with the controller Setting up SNMP Network Service The following provided for the SNMP Network Service are unavailable when the controller is connected to the equipment.  Enable SNMP V3  SNMP V3 User Information/ ...

  • Page 18: Maintaining From Command Center

    1 RESTRICTIONS For details on the Network settings screen, refer to the COMMAND CENTER Guide.  Setting up Print Service settings The following related to Print Service cannot be used when the controller is connected to the equipment:  Raw TCP Print ...

  • Page 19: Registering From Command Center

    1 RESTRICTIONS 1.RESTRICTIONS Machine without the controller Machine with the controller For details on the Maintenance screen, refer to the COMMAND CENTER Guide.  Registering from COMMAND CENTER  Registering public templates The restrictions applied for making public templates are the same as those for private templates. For details, see the following section: ...

  • Page 20: Software Included In The Client Utilities Cd-Rom

    1 RESTRICTIONS Software Included in the Client Utilities CD-ROM The Client Utilities CD-ROM contains the drivers and utilities listed below. However, some of them are unavailable when the controller is connected to the equipment. Machine without the controller Machine with the controller Client software for the print functions PCL 6 printer driver PS3 printer driver...
  • Page 21 GA-1310 SPECIFIC FUNCTIONS This chapter describes the GA-1310 specific functions which are available when the GA-1310 controller is connected to the same series. Operations from the Control Panel..................20 Turning power off (Shutdown) ..........................20 MENU...................................20 SCAN ...................................21 USER FUNCTIONS .............................32 COMMAND CENTER USER Mode ..................

  • Page 22: Operations From The Control Panel

    2 GA-1310 SPECIFIC FUNCTIONS Operations from the Control Panel The same series machine with the GA-1310 controller has several specific functions in the following operation menus:  P.20 “Turning power off (Shutdown)”  P.20 “MENU”  P.21 “SCAN”  P.32 “USER FUNCTIONS” ...

  • Page 23: Scan

    2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS  SCAN When you press the [SCAN] button on the control panel, the SCAN screen is displayed on the touch panel. 1. [USB] This button is used to save scanned images as PDF, XPS, TIFF, or JPEG files in a USB storage device. To learn more about Scan to USB, see the following section: ...
  • Page 24 2 GA-1310 SPECIFIC FUNCTIONS Scanning to USB Place the original(s). For help, refer to the Copying Guide. On the control panel, press the [SCAN] button to enter the SCAN menu. Press [USB]. If you want to preview your scans later, press [PREVIEW] here and then select the scan function. For instructions on how to preview your scans, refer to the Scanning Guide.
  • Page 25 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS If the “FOUND USB DEVICE” message appears on the touch panel, define the settings for the new file as required. 1) Press [FILE NAME] and change the file name. 2) Select an option for each of the FILE FORMAT, MULTI/SINGLE PAGE and/or SECURITY settings. 3) Finally, press [OK].
  • Page 26 2 GA-1310 SPECIFIC FUNCTIONS Press [SCAN].  To scan 2-sided documents or change settings such as Color Mode and Resolution, press [COMMON SETTING]. For details, refer to the Scanning Guide.  You can preview your scans by pressing [PREVIEW], followed by [SCAN]. For details, refer to the Scanning Guide.
  • Page 27 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS  SCAN TO FTP — to a specified FTP server  SCAN TO HOLD QUEUE — to the hold queue of the controller Scan jobs are held until users operate copying or moving them to the print queue with the job management tools. For details on the job management tools, refer to the Utilities.
  • Page 28 2 GA-1310 SPECIFIC FUNCTIONS Continue the operation as required.  To store the scan in a network folder, proceed to Step 5.  To store the scan in an FTP server, proceed to Step 6.  To store the scan in the hold queue in the controller, proceed to Step 7. ...
  • Page 29 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS Specify the following items as required and press [OK]. When you specify the setting items, proceed to Step 9. [NETWORK PATH] — Press this button to enter the path to a folder in the FTP server where you want to store the scanned data.
  • Page 30 2 GA-1310 SPECIFIC FUNCTIONS Specify the following items as required and press [OK]. When you specify the setting items, proceed to Step 9. [MAILBOX NAME] — Press this button to enter the mailbox name where you want to store the scanned data. [DOCUMENT NAME] —...
  • Page 31 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS When performing a scan operation, you can select 2 scan functions at one time. If you want to perform a scan operation with 2 scan functions selected, select the second scan function that you want to use on the above screen, and make the settings required for the selected scan function.
  • Page 32 2 GA-1310 SPECIFIC FUNCTIONS If the screen below appears, place another original on the original glass and press [SCAN] or the [START] button to continue scanning. To finish the job, press [JOB FINISH], followed by the [FUNCTION CLEAR] button.  The above screen is not displayed under the following conditions: A scan preview is displayed.
  • Page 33 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS Regarding restrictions on Scan to SMB/FTP/OTHER Scan to SMB/FTP/OTHER is restricted depending on the Role Based Access Control setting as follows:  When “File Share” is OFF, the [SCAN TO SMB], [SCAN TO FTP] and [SCAN TO HOLD QUEUE] buttons are unavailable.

  • Page 34: User Functions

    2 GA-1310 SPECIFIC FUNCTIONS  USER FUNCTIONS Follow the steps below for the setting operations of [IPv4] and [HTTP] provided in the NETWORK menu.  Setting the TCP/IP protocol (IPv4) The TCP/IP settings are automatically set when the controller is installed. If the TCP/IP settings are changed, the equipment cannot communicate with the controller.

  • Page 35: Setting The Http Network Service

    2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS Confirm the settings and press the [CANCEL] button to return to the NETWORK menu. Do not change the TCP/IP settings. If the settings are changed, the equipment will be disabled to communicate with the controller. ...
  • Page 36 2 GA-1310 SPECIFIC FUNCTIONS Specify the following items as required and press [OK]. ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable the HTTP network server service. This option must be enabled for using the following functions: ...

  • Page 37: Command Center User Mode

    2 GA-1310 SPECIFIC FUNCTIONS COMMAND CENTER USER Mode The same series machine with the GA-1310 controller has several specific functions in the following operation menus:  P.35 “Launching COMMAND CENTER from the WebTools home page”  P.35 “Registering or editing GA-1310 specific private templates” ...
  • Page 38 2 GA-1310 SPECIFIC FUNCTIONS When the Input Group Password page is displayed, enter the 5-digit password (or administrator’s password) for the selected private template group and click [OK]. The Private Templates page is displayed. From the templates list, click the [Undefined] icon to register a new template, or click defined icon to edit the template.
  • Page 39 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS When the Input Template Password page is displayed, enter the 5-digit password (or administrator’s password) for the selected private template and click [OK]. The Template Properties page is displayed. Click [Edit] to define or edit the template properties. The Template Properties page to select agents is displayed.
  • Page 40 2 GA-1310 SPECIFIC FUNCTIONS Click each button displayed in the page to specify or edit the associated template properties. [Panel Setting] — Click this button to specify the icon settings for the template.  P.39 “Panel Setting (Private template)” [SMB/FTP/OTHER Setting] — Click this button to specify where the scanned document will be sent. ...
  • Page 41 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS  Panel Setting (Private template) In the Panel Setting page, specify how the icon for the template is displayed in the touch panel. 1) Picture This indicates the icon that will be displayed in the touch panel. The icon is automatically designated according to the agent that you select.
  • Page 42 2 GA-1310 SPECIFIC FUNCTIONS 1) SMB Select this check box to store the scan in a network folder. 2) Network Path Enter the network path to the folder where you want to store the scanned data. For example, to specify the “users\scanned”...
  • Page 43 2 GA-1310 SPECIFIC FUNCTIONS 2.GA-1310 SPECIFIC FUNCTIONS  Scan Setting (Private template) In the Scan Setting page, you can specify how originals are scanned for the SMB/FTP/OTHER agent. 1) Preview Select whether to display the scanned image on the control panel after the scanning an original. - OFF —...
  • Page 44 2 GA-1310 SPECIFIC FUNCTIONS 7) Original Mode Select the document type of the originals. - Text — Select this option to set the Text mode as the default original mode. - Text/Photo — Select this option to set the Text/Photo mode as the default original mode. This can be selected only when [Black] is selected in the [Color Mode] box.

  • Page 45: Command Center Admin Mode

    2 GA-1310 SPECIFIC FUNCTIONS COMMAND CENTER ADMIN Mode  Registering or editing GA-1310 specific public templates The GA-1310 specific functions applied for making public templates are the same as those for private templates. For details, see the following section:  P.35 “Registering or editing GA-1310 specific private templates” ...

  • Page 47: Troubleshooting

    TROUBLESHOOTING This chapter describes how to troubleshoot the problems that could occur while you are using the equipment with the GA- 1310 controller attached. Scanning Problems........................ 46 The scanned data cannot be saved in the specified location ................46 Error Codes..........................47 Error codes on print jobs ............................47...

  • Page 48: Scanning Problems

    3 TROUBLESHOOTING Scanning Problems This section describes troubleshooting for using scan data.  The scanned data cannot be saved in the specified location Problem Description I have scanned a document from the [SCAN] button on the control panel by using the SMB/FTP/OTHER menu, but the data is not saved in the specified location.

  • Page 49: Error Codes

    3 TROUBLESHOOTING Error Codes COMMAND CENTER has the pages for the job lists; print, transmission, reception, and scan jobs. The following error codes are shown on these pages in the [Logs] tab (successful jobs have no codes). These codes help you specify the cause of an error you might encounter.

  • Page 51: Index

    INDEX ............42 Outside Erase ............39 Automatic Start Panel Setting ..........38 Private template ...............42 Background ............ 26 [PASSWORD] ..............40 Password ..............39 Picture ..............39 Caption1 ..............41 Preview ..............39 Caption2 ........34 [PRIMARY PORT NUMBER] ...............41 Color Mode .............41 Compression ..............42...
  • Page 52 INDEX...
  • Page 53 Printed in China...
  • Page 54 First edition 2009.4 305JN56090...

This manual is also suitable for:

Taskalfa 750cTaskalfa 550cGa-1310

Table of Contents