Setting Original Modes - Kyocera TASKalfa 650c Copying Manual

3 BASIC COPY MODES

Setting Original Modes

You can make copies with the optimal image quality by selecting the following modes for your original. The selectable
original mode differs depending on the color mode as shown in the table below. Select the color mode first, and then the
original mode.
Original mode
TEXT/PHOTO Originals with text and photographs mixed
TEXT Originals with text (or text and line art) only
PRINTED IMAGE Originals with photogravure (e.g. magazine, brochure)
Originals with general photographs on photographic
printing paper
PHOTO
Originals with photographs
MAP Originals with fine illustrations or text
IMAGE Originals with text and photographs mixed (especially
SMOOTHING originals requiring higher reproducibility on photos)
TEXT/PHOTO is set by default. The default setting can be changed in each color mode. For details, refer to the MFP
Management Guide.
1 Press [ORIGINAL MODE] on the touch panel.
60

Setting Original Modes

Description
Color mode
FULL
BLACK
COLOR
Yes Yes
Yes Yes
Yes —
Yes —
— Yes
Yes —
— Yes
AUTO
COLOR
Yes
Yes
Yes
—
—
—
—