Placing Originals On The Original Glass - Kyocera TASKalfa 650c Copying Manual

2 HOW TO MAKE COPIES

Placing originals on the original glass

The original glass can be used for originals such as OHP films or tracing paper, as well as plain paper, that cannot be
placed on the RADF.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
Raise the RADF.
1
Raise it 60 degrees or more so that the size of the original can be detected correctly.
Place the original with its face down on the original
2
glass and align it against the left rear corner of the
glass.
When you copy highly transparent originals
When you copy highly transparent originals such as OHP films or
tracing paper, place a blank sheet, which is the same size as the
original or larger, over the original.
3 Lower the RADF carefully.
28 Placing Originals